Description
Butyl sealant Approx 16.4′(5m) ,Thickness: Approx 3/8″, long enough for re-sealing about 2 or 4 headlight assemblies,easy to cut to fit for your need.
FEATURES: : – Ideal tape for glass, boating, RV, EPDM roofing sealing, car & truck headlights and so on. – Extra thick is making the tape easier to install like pros. – Instant watertight bonding and air tight sealing. – Work widely on different surfaces like wood, metal, glass, plastic and etc. – Resists temperature into a gooey slob and resisting stiffness at low temperature which makes the tape hard to use. – Non-drying and non-hardening at full season. – The tape is painting to ensure for neat and seamless after your installation. – Mess free installation, shut off wind, water, dust, oil, grease, vapor, moisture, corrosive chemical and other leakages. – Wide operating temperature range from -20 to 98 Celsius degree. – Package in single box.
IMPORTANT NOTES 1. ALWAYS APPLY WIDER TO THE LEAKING SPOTS AND COVER LEAKAGE FROM SOURCE. 2. DUST, SANDS & CRACKS ON SURFACE MUST BE CLEAN / DRY TO CREATE PAMERNANT AND STRONG BONDING. 3. DO NOT TRY TO CHECK TAPE BY PULLING UP OR WETTING WHEN JUST DONE, LEAVE THE TAPE 24 – 48 HOURS CURING TIME.
- Butyl sealant Approx 16.4′(5m) ,Thickness: Approx 3/8″
- Available for sealing or resealing car headlights
- windshield, headlamp, air conditioners,door waterproof film
- decorative parts,bus body and frame. use anywhere that a watertight seal is needed
- Used to create a seal or deaden sound on all types of vehicles
- (Cars, RVs, Boats) and around the house (windows, screen doors, sky lights, vents)
|
|
|
|
|
|---|---|---|---|
How To Properly Install Butyl Tape
Installing joist tape has just a few straightforward steps, detailed below:
- Prepare. Pay attention to application temperatures. The tape will seal when the product warms above 40˚F. Trex Protect works really well in high temperatures. It is best applied to a dry surface.
- Clean the joist surface, making sure it is dry and free of debris.
- Remove the butyl tape backing while applying directly to the surface. Run your hand over the tape and firmly press it onto the joists.
- After covering all horizontal and vertical surfaces, cut the tape to length with a utility knife or scissors.
A deck’s strength is in what lies beneath. To keep your wood substructure from succumbing to the ravages of rot, you’ll want to protect it from the start with joist tape. This small investment upfront will pay you back with more years on deck and more peace of mind.
Reviews
There are no reviews yet.